Black Plastic Acoustic Guitar Preamp Pickup 301 for Play Board Radio for Acoustic Acoustic Guitar

Features: 1. Application: Suitable for acoustic acoustic guitar, this pickup adopts copper wire soft rod for the pickup rod sound more full and mild, general pickups are ceramic hard rod sound color is relatively dry. 2. Function: The volume of the microphone is controlled by the mic blend button on the panel, and the microphone is mainly used for playing board radio in the pickup. 3. Material: Composed of plastic, soft and flexible texture. 4. Size: The diameter of the sound bar is about 1.5mm (for reference only), the texture is soft and flexible, and the copper wire at the tail can not be cut or welded, so as to avoid damaging the internal structure and causing noise or even damaging the sound bar. 5. Note: the signal output of the main machine is transmitted by the three-pin base, while the signal input of the pickup bar is fixed and welded in the main machine. The nut cover on the tail nail must be screwed in place so that the connector plug can be inserted in place. 6. The basic buttons of the pickup are: Low Indicator (batt) Tuner display Total volume tuner Switch (tuner) Low frequency (bass) middle frequency High frequency (treble) Gain noise suppression button (notch) mic blend phase switch Specifications: Material: Plastic Color: Black Brand name: logyues Size: Length approx. 82mm (3.23") Width approx. 56mm (2.20") Height approx. 58mm (2.28") Hole spacing: 71mm (2.80") and 46mm (1.81") Weight:0.1kg Package include: 1x cable tie 1x sucker 1x screw 2x support

• Application: Suitable for acoustic acoustic guitar, this pickup adopts copper wire soft rod for the pickup rod sound more full and mild, general pickups are ceramic hard rod sound color is relatively dry.
• Function: The volume of the microphone is controlled by the mic blend button on the panel, and the microphone is mainly used for playing board radio in the pickup.
• Material: Composed of plastic, soft and flexible texture.
• Size: The diameter of the sound bar is about 1.5mm (for reference only), the texture is soft and flexible, and the copper wire at the tail can not be cut or welded, so as to avoid damaging the internal structure and causing noise or even damaging the sound bar.
• Note: the signal output of the main machine is transmitted by the three-pin base, while the signal input of the pickup bar is fixed and welded in the main machine. The nut cover on the tail nail must be screwed in place so that the connector plug can be inserted in place.